Plastic Extruder Use 220 Micron Filter Screen
1.Material: AISI 202/304/316/304L/316L, etc.
2.Wire Dia:0.02--2.0mm.
3.Mesh: 1-- 635mesh.
4.Aperture(micron):25-- 25400μ
5.Weave pattern: dutch weave,twill weave,etc.
6. Sample: stainless steel mesh sapmle is available.
Plain Weave Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.
Characteristics Square aperture ,high flow through , relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration up to 63 µm.
Twill Weave Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from 30 mesh to 500 mesh.
Characteristics Square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than 63 μm .
Stainless Steel Wire Mesh Dutch Weave
Stainless Steel Wire Specification(Dutch Weave) |
Mesh |
Wire Diameter (mm) |
Material(Alsl) |
12*64 |
0.058*0.04 |
304 or 316 |
24*110 |
0.36*0.25 |
304 or 316 |
14*88 |
0.5*0.33 |
304 or 316 |
30*150 |
0.23*0.18 |
304 or 316 |
40*200 |
0.18*0.13 |
304 or 316 |
50*250 |
0.14*0.11 |
304 or 316 |
80*700 |
0.1*0.08 |
304 or 316 |
165*800 |
0.071*0.04 |
304 or 316 |
165*1400 |
0.06*0.04 |
304 or 316 |
200*1800 |
0.05*0.032 |
304 or 316 |
325*2300 |
0.035*0.025 |
304 or 316 |
400*2800 |
0.03*0.02 |
304 or 316 |